Bite Type Bulkhead Female Connector
Introduction:
Material: Stainless Steel / Brass / Carbon Steel / Titanium
Finish Treatment: Nickel Plated / Zinc Plated
view：1,075
Description:
| Bite Type Bulkhead Female Connector Specsheet | ||||||||
| Tube O.D. Ø |
JIS B0203, ISO7/1 Tapper Thread |
Panel Hole Size | Dimensions | H | h | h1 | ||
| Ø T | Ø E | F | L | |||||
| 6 | 1/4" | 11.5 | 4.8 | 15.5 | 52 | 14 | 19 | 16 |
| 8 | 1/4" | 13.2 | 6.4 | 16.2 | 53.4 | 16 | 19 | 17 |
| 10 | 3/8" | 16.3 | 8 | 17.2 | 56.5 | 19 | 22 | 22 |
| 12 | 1/2" | 19.5 | 9.7 | 23 | 67 | 22 | 27 | 24 |
| Tube O.D. Ø |
JIS B0203, ISO7/1 Tapper Thread |
Panel Hole Size | Dimensions | H | h | h1 | ||
| Ø T | Ø E | F | L | |||||
| 1/4" | 1/4" | 11.5 | 4.8 | 15.5 | 52 | 14 | 19 | 16 |
| 1/2" | 1/2" | 19.5 | 10.5 | 23 | 67 | 22 | 27 | 24 |
*Unless Otherwise Specified All Dimensions in Millimeter.
*This item isn’t in normal stock and needs to be produced per request.
*Customized size not in above table is acceptable.
*ISO/JIS Tapper, NPT, Metric thread could be customized.
| BSPT (ISO7/1 / JIS B0203) | ||||
| Dash Size | Inch Size | Nominal Thread Size | Male Thread O.D. | Female Thread I.D. |
| -2 | 1/8" | 1 / 8 – 28 | 3/8 (0.38") | 11/32 (0.35") |
| -4 | 1/4" | 1 / 4 – 19 | 33/64 (0.52") | 15/32 (0.47") |
| -6 | 3/8" | 3 / 8 – 19 | 21/32 (0.65") | 19/32 (0.60") |
| -8 | 1/2" | 1 / 2 – 14 | 13/16 (0.82") | 3/4 (0.75") |
| -10 | 5/8" | 5 / 8 – 14 | 7/8 (0.88") | 13/16 (0.80") |
| -12 | 3/4" | 3 / 4 – 14 | 1 1/32 (1.04") | 31/32 (0.97") |
| -16 | 1" | 1 – 11 | 1 5/16 (1.30") | 1 7/32 (1.22") |
| -20 | 1 1/4" | 1 1/4 – 11 | 1 21/32 (1.65") | 1 9/16 (1.56") |
| NPT | ||||
| Dash Size | Inch Size | Nominal Thread Size | Male Thread O.D. | Female Thread I.D. |
| -2 | 1/8" | 1 / 8 – 27 | 13/32 (0.41") | 3/8 (0.38") |
| -4 | 1/4" | 1 / 4 – 18 | 17/32 (0.54") | 1/2 (0.49") |
| -6 | 3/8" | 3 / 8 – 18 | 11/16 (0.68") | 5/8 (0.63") |
| -8 | 1/2" | 1 / 2 – 14 | 27/32 (0.84") | 25/32 (0.77") |
| -12 | 3/4" | 3 / 4 – 14 | 1 1/16 (1.05") | 1 (0.98") |
| -16 | 1" | 1 – 11 1/2 | 1 5/16 (1.32") | 1 1/4 (1.24") |
| -20 | 1 1/4" | 1 1/4 – 11 1/2 | 1 21/32 (1.66") | 1 19/32 (1.58") |
| Metric | |||
| Thread Callout | Thread Pitch (mm) | Male Thread O.D (mm) | Female Thread I.D (mm) |
| M8 X 1.0 | 1.0 | 8 | 6.9 |
| M10 X 1.0 | 1.0 | 10 | 8.9 |
| M10 X 1.5 | 1.5 | 10 | 8.4 |
| M12 X 1.0 | 1 | 12 | 10.9 |
| M12 X 1.5 | 1.5 | 12 | 10.4 |
| M14 X 1.5 | 1.5 | 14 | 12.4 |
| M16 X 1.5 | 1.5 | 16 | 14.4 |
| M18 X 1.5 | 1.5 | 18 | 16.4 |
| M20 X 1.5 | 1.5 | 20 | 18.4 |
| M22 X 1.5 | 1.5 | 22 | 20.4 |
| M24 X 1.5 | 1.5 | 24 | 22.4 |
| M26 X 1.5 | 1.5 | 26 | 24.4 |
| M27 X 2.0 | 2 | 27 | 24.8 |
| M30 X 2.0 | 2 | 30 | 27.8 |
| M33 X 2.0 | 2 | 33 | 30.8 |
| M36 X 2.0 | 2 | 36 | 33.8 |