Most nozzles are used in atomizing, air-aspirating, swirling, air jetting, atomized spraying, oil spraying, and sandblasting so on application. It is suitable for cleaning, water curtain, cooling, coating, spraying, defoaming, humidifying, and dust reduction. There are a few factors for selecting a nozzle: spray shape, droplet distribution angle, pressure, flow rate, and materials. The spray shape (or distribution shape) refers to the shape generated on the vertical surface of the spray and the nozzle. Our nozzles line includes flat fan, full cone, and hollow cone based on its spray shapes.

Flat fan nozzle series has standard and wide-angle type. Its spray angles of standard type cover from minimum 15° to maximum up to 100°. Wide fan type has wide spray angle from 120°, 150° and 170°.
Spray angle will vary with the distance and operating pressure. The angle of the nozzle under the standard operating pressure (3 kgf/cm²) is actual spray angle (plus and minus 5 degree). A tolerance of ± 5° must be taken into consideration for designing the spray system.

Flow distribution is varied with pressure and spray height; the lighter the fluid, the higher the pressure, also the more the spray volume.

Features

-Reducing blocking.

-Wide spraying angle helps evenly droplet distribution.

-Material: SUS303, SUS316, Brass