PE-A Eductor Nozzle
Introduction:
-Recommended working pressure: 0.5 kgf/cm²
-Flowrate tolerance: ± 10% @ 0.5 ± 0.1 kgf/cm²
view:471
Description:
Thread (BSPT) | Size(mm) | Weight (g) | |||
A | B | C | D | ||
1/4''Male | 28.87 | 39.85 | 17.95 | 19.6 | 3.5 |
FEATURES
-Used for liquid stirring under the liquid surface. Specially designed nozzle that creates a stirring and circulating effect. This nozzle can mix chemicals, direct the suspended substances to a filter and prevent precipitation.
-Energy-efficiency of liquid stirring: the eductor nozzles are designed to suck and spray liquid through the amplified nozzle tube to increase liquid flow rate up to 4 times which provides more efficient stirring than aeration or robot arms (Quantity supplied+Intake=Total Flow).
-Single piece structure and hand installable without any tools.
-Energy-efficiency of liquid stirring: the eductor nozzles are designed to suck and spray liquid through the amplified nozzle tube to increase liquid flow rate up to 4 times which provides more efficient stirring than aeration or robot arms (Quantity supplied+Intake=Total Flow).
-Single piece structure and hand installable without any tools.
APPLICATION
● Cleaning: scrubber, off-gas treatment, etc.
● Cooling: cooling tower, etc.
● Dispersion: firefighting.
● Cooling: cooling tower, etc.
● Dispersion: firefighting.