PE-B Eductor Nozzle
Introduction:
-Recommended working pressure: 0.5 kgf/cm²
-Flowrate tolerance: ± 10% @ 0.5 ± 0.1 kgf/cm²
view：438
Description:
| Thread (BSPT) | Size (mm) | Weight (g) | ||
| A | B | S316 | FRPP | |
| 3/8''BSPT Male | 54 | 116 | 274 | - |
| 3/4''BSPT Male | 74 | 159 | - | 84.6 |
| 3/8''BSPT Male | 54 | 116 | - | 34 |
FEATURES
-Used for liquid stirring under the liquid surface. Specially designed nozzle that creates a stirring and circulating effect. This nozzle can mix chemicals, direct the suspended substances to a filter and prevent precipitation.
-Energy-efficiency of liquid stirring: the eductor nozzles are designed to suck and spray liquid through the amplified
-Energy-efficiency of liquid stirring: the eductor nozzles are designed to suck and spray liquid through the amplified
nozzle tube to increase liquid flow rate up to 4 times which provides more efficient stirring than aeration or robot arms (Quantity supplied+Intake=Total Flow).
-Single piece structure and hand installable without any tools.
-Single piece structure and hand installable without any tools.
APPLICATION
● Cleaning: scrubber, off-gas treatment, etc.
● Cooling: cooling tower, etc.
● Dispersion: firefighting.
● Cooling: cooling tower, etc.
● Dispersion: firefighting.