PF-G Flat Fan Nozzle
Introduction:
-size:
● Spec of drilling installation hole: 8.35~9m/m
● Size of Pipe clamp: 3/4"(OD26 +/-0.2mm), 1"(OD34+/-0.3mm)
-Recommended working pressure: 1.5 kgf/cm²
-Flowrate tolerance: ± 10% @ 1.5 ± 0.1kgf/cm²
-Angle tolerance: ± 10° @ 1.5 ± 0.1kgf/cm²
view：444
Description:
| Thread(BSPT) | Size(mm) | Weight(g) | |||
| A | B | C | D | ||
| 3/4" Clamp | 23 | 22.7 | 18 | 64 | 23.6 |
| 1" Clamp | 28.5 | 33 | 23.5 | 64 | 28 |
-The spray pattern is fan type, and the spray shape is single-line.
-Low-pressure wide-angle nozzles can achieve large angle coverage under 1.5kgf/cm² pressure. The coverage area is smaller than the standard fan type 3kgf/cm² operating pressure, and is more suitable for low-pressure working environment.
-Spray the nozzle at an angle of 75° with respect to the axis of the nozzle. Check the environment before installation.
-The hooked nozzle tip is designed to reflect the water into a fan shape nozzle and greaten particle passage to prevent clogging.
-Multi-piece structure, easy maintenance, cleaning and replacement, and can save the cost of replacement nozzle head; filter design, easy maintenance, reduce blocking, and can reduce damage caused by maintenance and unclogging.
-PVDF is resistant to temperature and corrosive chemical solutions.
-Low-pressure wide-angle nozzles can achieve large angle coverage under 1.5kgf/cm² pressure. The coverage area is smaller than the standard fan type 3kgf/cm² operating pressure, and is more suitable for low-pressure working environment.
-Spray the nozzle at an angle of 75° with respect to the axis of the nozzle. Check the environment before installation.
-The hooked nozzle tip is designed to reflect the water into a fan shape nozzle and greaten particle passage to prevent clogging.
-Multi-piece structure, easy maintenance, cleaning and replacement, and can save the cost of replacement nozzle head; filter design, easy maintenance, reduce blocking, and can reduce damage caused by maintenance and unclogging.
-PVDF is resistant to temperature and corrosive chemical solutions.
-If operation pressure is greater than 4kgf/cm², May cause the liquid to overflow without fogging.
APPLICATION
● Cleaning: Conveyor belt, film, copper thin, paper, glass plate, all kinds of plates, filters, dust and gravel, and machine tool cleaning.
● Cooling: Conveyor belt, gas, tank, machinery, metal, roof etc.
● Dispersion: Humidifying, Chemicals, firefighting, dedust, deodorization, defoaming, etc
● Cooling: Conveyor belt, gas, tank, machinery, metal, roof etc.
● Dispersion: Humidifying, Chemicals, firefighting, dedust, deodorization, defoaming, etc