PC-D Full Cone Nozzle
Introduction:
-size:
● Drilling hole size for pipe clamp: Ø 20 (19.0~20m/m)
● Fits pipe size: 1-1/4"(OD42 +/-0.3mm), 1-1/2"(OD48 +/-0.4mm)
-Recommended working pressure: 2.0 kgf/cm²
-Flowrate tolerance: ± 10% @ 2.0 ± 0.1 kgf/cm²
-Angle tolerance: ± 10° @ 2.0 ± 0.1 kgf/cm²
view：448
Description:
| Pipe Size (BSPT) | Size (mm) | Weight (g) | |||
| A | B | C | D | ||
| 1-1/4'' | 42.35 | 49.5 | 31 | 85.3 | 105.4 |
| 1-1/2'' | 42.35 | 49.5 | 31 | 85.3 | 100.5 |
FEATURES
-Full cone spray.
-The two-piece combination design is divided into a nozzle and a body. The nozzle part can be fixed to the body without fixing the nut. The body has a special pipe clamp design. It is only necessary to drill a hole in the water outlet pipe, and then lock it with iron screw. The nozzle is fixed on the pipe. This nozzle is commonly used in the
-The two-piece combination design is divided into a nozzle and a body. The nozzle part can be fixed to the body without fixing the nut. The body has a special pipe clamp design. It is only necessary to drill a hole in the water outlet pipe, and then lock it with iron screw. The nozzle is fixed on the pipe. This nozzle is commonly used in the
pre-painting and continuous casting machine cooling process.
APPLICATION
● Cleaning: Dust, cleaning device etc.
● Dispersion: Humidifying, Chemicals, firefighting, and dust suppression.
● Dispersion: Humidifying, Chemicals, firefighting, and dust suppression.