PC-G Full Cone Nozzle
Introduction:
-Recommended working pressure: 2.0 kgf/cm²
-Flowrate tolerance: ± 5% @ 2.0 ± 0.1 kgf/cm²
-Angle tolerance: ± 5° @ 2.0 ± 0.1 kgf/cm²
view：283
Description:
| Thread (BSPT) | Size (mm) | Weight (g) | ||
| A | B | C | ||
| 1/8''Male | 35 | 27.5 | 39 | 18.7 |
| 1/4''Male | 35 | 27.5 | 42.6 | 19.1 |
| 3/8''Male | 35 | 27.5 | 42.6 | 20.8 |
SIZE OF BODY UPTION1&2
| Thread(mm) | Weight (g) | |||
| A | B | C | D | |
| 26.5 | 10.1 | 12 | 31.4 | 8.6 |
|
Thread(mm) |
Weight (g) | |||
| A | B | C | D | |
| 25.6 | 16.5 | 20.4 | 38.3 | 12 |
FEATURES
-Full cone spray.
-PVDF and PP materials are temperature and chemicals resistant.
-Adopts a holeless multi-slotted core, possessing a more uniform impact than other standard solid cone nozzles of the same type. It is often used in semiconductor and printed circuit board etching and developing processes where spraying uniformity is extremely demanding.
-Two piece nozzle design which includes nozzle and the body allows quick and accurate installation by hand. It is convenient for on-site management. Nozzle tip is secured into the body and fastened by three buckle points to avoid the nozzle tip loosening and ensure the performance quality.
-Internal gaskets are available in various options such as EPDM, Viton, and FEPM, which can be adapted to various types of chemical processes. The special structural design allows the nozzles to closely contact the base to prevent water leakage.
-Y-shaped rotary handle design leads to easier dismantling.
-According to the working environment, the body has two choices of thread type and welding type.
-PVDF and PP materials are temperature and chemicals resistant.
-Adopts a holeless multi-slotted core, possessing a more uniform impact than other standard solid cone nozzles of the same type. It is often used in semiconductor and printed circuit board etching and developing processes where spraying uniformity is extremely demanding.
-Two piece nozzle design which includes nozzle and the body allows quick and accurate installation by hand. It is convenient for on-site management. Nozzle tip is secured into the body and fastened by three buckle points to avoid the nozzle tip loosening and ensure the performance quality.
-Internal gaskets are available in various options such as EPDM, Viton, and FEPM, which can be adapted to various types of chemical processes. The special structural design allows the nozzles to closely contact the base to prevent water leakage.
-Y-shaped rotary handle design leads to easier dismantling.
-According to the working environment, the body has two choices of thread type and welding type.
APPLICATION
● Cleaning: Gas, exhaust gas, dust, cleaning device, tank cleaning, etc.
● Cooling: gas, tank, machinery, metal, roof etc.
● Dispersion: Humidifying, Chemicals, dust suppression.
● Cooling: gas, tank, machinery, metal, roof etc.
● Dispersion: Humidifying, Chemicals, dust suppression.